New Reproduction Borg Warner Overdrive 6 Volt or 12 Volt Solenoids We now have available brand new exact reproductions of the original Borg Warner overdrive solenoids. These are available for both 6-volt and 12-volt applications. This is the same solenoid used by all eleven of the car companies that offered the Borg Warner electric overdrive as an option from the late 1930’s thru the early 1960’s. No core is required. These will fit standard Borg Warner overdrive applications… those with a shaft length of one inch measured from the tip of the shaft to the edge of the alignment flange. (lay your ruler on top of the shaft and measure from the ball end to the edge of the casting.) All standard overdrive-solenoids will measure one inch. Station Wagons and convertibles will measure 1.5 inches and a few odd applications will measure 1.25 inches or longer. This solenoid fits the STANDARD one inch applications only. Please check you shaft length before ordering.
Borg Warner Overdrive Solenoid 6 volts
Borg Warner Overdrive Solenoid 12 volts
Vintage Auto Garage Weblog 